Описание оборудования | |
---|---|
EtherCat gateway with integrated safety monitor, double master for 2 AS-Interface networks, power supply input with decoupling coils | |
General specifications | |
AS-Interface specification | V3.0 |
PLC-Functionality | activateable |
Duplicate address detection | from AS-Interface slaves |
Earth fault detection | integrated |
EMC monitoring | integrated |
Diagnostics function | Extended function via display |
Switch-on delay | < 10 s |
Response delay | < 40 ms |
UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
Functional safety related parameters | |
Safety Integrity Level (SIL) | SIL 3 |
Performance level (PL) | PL e |
MTTFd | 100 a |
B10d | 2.5 E+5 |
Indicators/operating means | |
Display | Illuminated graphical LC display for addressing and error messages |
LED ETHERNET | EtherCAT active; LED green |
LED AS-i ACTIVE | AS-Interface operation normal; LED green |
LED CONFIG ERR | configuration error; LED red |
LED PRG ENABLE | autom. programming; LED green |
LED POWER | voltage ON; LED green |
LED PRJ MODE | projecting mode active; LED yellow |
LED U AS-i | AS-Interface voltage; LED green |
LED AUX | ext. auxiliary voltage UAUX ; LED green |
LED IN | 6 x LED green |
LED OUT | Output circuit closed; 6 x green LEDs |
Button | 4 |
Switch SET | Selection and setting of a slave address |
OK button | Mode selection traditional-graphical/confirmation |
Button MODE | Mode selection PRJ-operation/save configuration/cursor |
ESC button | Mode selection traditional-graphical/cancel |
Electrical specifications | |
Insulation voltage | ? 500 V |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; 24VDC |
Rated operating current | approx. 300 mA PELV |
Interface 1 | |
Interface type | RJ-45 |
Physical | 2 x RJ-45 |
Protocol | EtherCAT acc. to IEEE 802.3 |
Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
Interface 2 | |
Interface type | RJ-45 Ethernet Diagnostic Interface |
Transfer rate | 10 MBit/s |
Interface 3 | |
Interface type | Chip card slot |
Input | |
Number/Type | 6 inputs Safety: 3 x 2 channels Or 6 standard inputs |
Output | |
Safety output | 6 semiconductor outputs Output circuits: 6 PNP transistor outputs Max. contact load: 1.2ADC-13 at 30VDC, ? = 7.2A in total (see derating) |
Connection | |
Ethernet |